Dashcam polarising filter (CPL): does it cut windscreen glare?

A circular polarising filter can remove dashboard reflections from dashcam video. How a CPL works, when it helps, when it hurts, and how to set it up and check the result.

Watch back a clip from a sunny day and you may see your own dashboard floating in the windscreen: a pale reflection across the lower half of the picture, sometimes bright enough to hide the road. A circular polarising filter, usually shortened to CPL, is the standard cheap fix.

It is not magic, and it is not right for every car or every hour of the day. This guide explains what it does and how to tell whether it is worth fitting.

What a CPL does

Light reflected from glass, water and other smooth surfaces is partly polarised. A polarising filter blocks light vibrating in one direction. Turn the filter to the right angle and much of the reflection from your dashboard disappears, while the view through the glass stays.

The same effect is why photographers use CPLs: they cut glare, deepen skies slightly and make colours look richer. For a dashcam, the glare on the windscreen is the main prize.

When it helps

  • Light or shiny dashboards. A beige or grey dash reflects far more than a black matte one.
  • Sunny weather. Reflections are strongest when the sun lights the dash.
  • Steeply raked windscreens. The flatter the glass, the more it reflects, and the more a CPL can remove.
  • Items on the dash. A sunshade, papers or a phone holder all show up in the glass.

When it does not help

A CPL costs light. Expect it to darken the image by roughly one to two stops, depending on the filter. That is fine at noon and a handicap at dusk or at night, where the camera is already struggling. See night recording tips for why light is precious after dark.

It also cannot fix everything:

  • Reflections from the inside of a dirty windscreen are only partly reduced.
  • It does nothing about headlights or lens flare.
  • The effect depends on the angle between the sun, the glass and the lens, so it changes as you turn or the day moves on.

Many people simply leave it on in summer and take it off for winter and night driving. Others never fit one and use a dark dash cloth instead, which costs nothing and has no downside after dark.

Does your camera take one?

Not every dashcam has a place for a filter. Several makers sell an optional CPL for specific models, and it normally clips or screws over the lens, with a ring you can rotate. Check the manual or the maker's accessory page for your exact model before buying, because a filter made for a different camera may not fit. At the time of writing, a CPL for a dashcam typically costs about $10 to $25.

If your camera has no filter option, do not glue a generic filter over the lens. It can sit crooked, trap moisture, or come loose on a hot day. See dashcam heat and summer care for what summer does to the glass and mount.

Setting it up

  1. Fit the camera first. Mount it in its final position, behind the mirror, following the installation guide.
  2. Attach the filter. Keep the lens and the filter clean; fingerprints show up as haze.
  3. Rotate the ring. On a bright day, look at the live view on the camera or the phone app and turn the ring until the reflection fades most. Tighten or lock it if the filter allows.
  4. Record a short test drive. Reflections change with the angle, so a test on a stationary car is not enough.

Check the result on a computer

The small screen on a camera is a poor judge of reflections. Copy the clips to a computer and compare footage from the same road with the filter on and off.

Tripframe is a free viewer that runs in your browser, with nothing to install. For this job it helps to:

  • Open two clips and step frame by frame to a similar spot on the road.
  • Zoom in on the lower part of the picture to see how much of the dash reflection remains.
  • Save a still as PNG, JPG or BMP to put the two results side by side.

Tripframe cannot change your camera's settings or rotate the filter for you; it only shows what the camera recorded. The features page lists what it can read.

What to remember

  • A CPL cuts dashboard and windscreen reflections, mostly in daylight.
  • It costs light, so it is a poor choice at night.
  • Only fit one made for your camera model.
  • Compare footage with and without it on a real drive.
  • A dark, matte dash cloth is a free alternative that works at any time of day.

If your day footage is already clean and the dash is dark, you may not need a filter at all. If you keep seeing the dashboard in your clips, it is the cheapest upgrade there is.